Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
One-step vertical activation furnace material is put into operation once, which saves time and effort and saves less investment. It is a kind of activation method of alternating activation of water vapor and flue gas. It can realize mechanical automation, without fuel and long service life, so it is widely used in the production of international granular activated carbon. If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
The rotary activated carbon steam activation furnace is suitable for the two high temperature steam activation of activated carbon. Activated carbon is widely used, and its raw materials are diverse, coal and wood. Coke is obtained by pyrolysis and carbonization of raw materials at high temperature, but the coke has smaller pores, more plugging and less adsorption capacity. It is necessary to open and increase pores through secondary activation to increase specific surface area and adsorption...
Rotary Carbonization Furnace Advantages : --Combustible waste can bu reduced in size by more than 95% --By-product of garbage carbonization process "artificial carbon" fixed carbon content in high (about 90%) --Partial carbonization of rubbish can be activated very scalable(can activate up to 75%) --EU standard emission --Energy recycling and reusing design to save fuel. The working principle of continuous coconut shell carbonization furnace,which is adopting advanced smoke-free and...
The activation method of the SLEP Furnace is a method of activating the steam and flue gas alternately. The SLEP furnace is mainly composed of the furnace body, the regenerator, the water seal, the feeder and the chimney. It is suitable for the production of various kinds of granular carbon, the process conditions are stable, the quality of the product is uniform, the adsorption performance is good, the production of various advanced activated charcoal, big production capacity , the mechanical...
One-step Activation Furnace material is put into operation once, which saves time and effort and saves less investment. It is a kind of activation method of alternating activation of water vapor and flue gas. It can realize mechanical automation, without fuel and long service life, so it is widely used in the production of international granular activated carbon. Apperance Size:6m*8m*9m Weight:100t Output:2-5t(/day) Power:7KW In addition, our company also sells Rotary Carbonization Furnace,...
Activated Carbon Regeneration Furnace (external Heating) The characteristics of activated carbon regeneration furnace are: 1, the material quality is even. The moving state of the material in the furnace is dynamic movement and turnover, and the heating is uniform, which ensures the full reaction of the material. 2, high heating efficiency. Because of the movement of the material, the heating area of the material is enlarged, the heat conduction and radiation are enhanced, and the firing cycle...
Activated carbon production equipment one-step activation furnace storage bin installation site Complete Set Of Equipment Activated Carbon Furnace,Carbonization Activation Stove,Activated Carbon Production Equipment,Complete Set Of Activated Equipment If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inquiry,Please send mail directly to us.
Activated carbon Crushing Equipment FMFQ (S) double mill used for crushing activated carbon materials as well as corn,broomcorn,brewage,feedstuff milling in large and medium-sized flour factories. Activated Carbon Crushing Equipments Structure features: It has adopted new design and compact structure affording good performances and high efficiency. The machine is made of manganese plate with cast iron base to work smoothly.Synchronou eltdrive and eccentric wheel make an efficient structure to...
Activated carbon Dedusting Equipment TBLM series pulse bag filter is a kind of equipment widely used in drying process. The equipment makes use of the filter cloth made of dense fibers to suck and filter the dust in the hot air, such as doped dust, coal ash and bio-energy ash produced by the hot stove. After dust removal, the clean hot air will enter the drying section along the pipeline. The dust and dust that remain on the filter cloth gradually become bigger and bigger, and eventually settle...
Activated Carbon Crushing Equipments :Activated Carbon Single Roller Crusher is mainly used for the crushing of activated carbon,one of the main equipments of the activated carbon particle size. Activated carbon Crushing Equipment In addition, our company also sells Activated carbon Screening Equipment,Activated carbon Dedusting Equipment , Activated carbon Packaging Equipment matched with activated carbon production. Mobile Phone: +8613153736907 +8613153738637 Wechat:+8615864124409...
Knife crusher is a special sample preparation and crushing equipment for coal and biomass fuel laboratory. Its main characteristics are: a device can meet the requirements of straw fiber material and coal, ore and other granular material samples at the same time, and the crushing ratio is large. The rotor blade is designed symmetrically, and special wear-resistant material is used after special treatment. It has high strength, high hardness and long service life. Activated carbon Crushing...
Activated carbon Packaging Equipment: The main components of LCS automatic quantitative tonnage bag packing scale are: feeding mechanism, weighing mechanism, pneumatic actuator, rail mechanism, bag clamping mechanism, dust removal mechanism, electronic control part of the integrated automatic packaging system. This series of equipment is usually used for fast and large capacity professional quantitative weighing packaging of solid granular materials and powder materials. It is also the...
Activated carbon Conveying Equipment All steel plates of good quality;Well sealed,no flying dust;Cold reduced blades,wear resistance;All high strength bolts in the joints; LSS Spiral Conveyor is mainly used to convey granula and powder materials,simple structured,easily operated,steady and reliable,which can charge and discharge at any place of the line;It is suitable for grain,feed,oil industries to horizontally convey granula and powder materials. In addition, our company also sells Rotary...
Activated carbon Dedusting Equipment XLD Type Cyclone Separator has many advantages such as using less metal material,has big air volume,simple structure,small resistance,high efficiency,small area occupied,less investment,easy maintain,fast effect,low energy consumption,no wearing parts etc... It has good effect on collecting dust with high density or big particle size.XLD Type Cyclone Separator will not be affected by different material concentration at entrance.According to different...
Activated carbon Dedusting Equipment Bag filter is a dry dust filter. After a period of use, due to the effects of filtration, collision, retention, diffusion and static electricity, a layer of dust accumulated on the surface of the filter bag. This layer of dust is called the primary layer. During the later movement process, the primary layer becomes the main filter layer of the filter material. With the effect of the primary layer, the filter material with larger mesh can also obtain higher...
Activated carbon Drying Equipment Working principle When the wet material is put into the dryer from one end, the material is evenly distributed and dispersed in the dryer under the turning of the plate-making device with uniform distribution in the inner cylinder. The material is fully contacted with the hot air of parallel flow (counter-current), which speeds up the drying heat transfer and transfers to the driving force. During the drying process, the material can be adjusted and moved to...
Stone Mill Flour Machine Equipment features and advantages: The design of stone mill flour mill is reasonable, the floor area is small, and the space is saved. At the same time, the motor and stone mill are perfectly combined to save energy and reduce consumption. Flour machinery and equipment, different from other industries machinery, flour quality is a measure of a flour mill must choose the conditions, flour quality is good, naturally to buy more flour, our flour machinery and equipment can...
Automatic Flour Machine The purpose of the powder making is to process the wheat after the cleaning and water adjustment through the automatic flour machine, to make the special powder suitable for different needs, special powder, fine powder, standard powder and so on, and separate the by-products at the same time. The most complex and most important section of wheat processing is the most complex and most complex process of wheat processing. The key to the process of pulverization is how to...
Large Flour Mill Equipment:Large Flour Machine are generally made up of two parts: milling and screening. They are grinding heads and round rolls. Machine For Making Flour working principle of the grinding head The grinding powder is part of the two grinding roller with an inclined tooth to squeeze the grain into the gradually shrinking grinding mouth, and the speed of the two grinding rolls is different, and the grinding force is produced to break the grain into powder, and the broken grain...
Small Flour Machine Product Features 1) grain processing equipment (mainly for wheat and maize/corn) 2) high efficiency and low consumption 3) low noise 4) scientific configuration with beautiful appearance 5) smoothly running and easy to operate 6) modern processing workshops 7) cost savings and very economical Wheat flour can be processed into wheat flour and wheat flour through small flour machinery. Below, we mainly talk about the process of processing wheat flour by using small flour...
Corn Flour Machine uses dry corn deskin and embryo removal technology, and the rate of leather embryo removal is relatively high. At present, China has the least occupied area, the highest degree of automation, the least investment and the most extensive processing equipment. The corn flour mill separates the peeling system and the beating system, and uses one power to drive the two machines into one. It can avoid corn husk mixed with corn bran, save manpower, space, equipment investment, and...
Activated carbon is a very good adsorbent. It uses charcoal, bamboo charcoal, various shells and high-quality coal as raw materials to crush, sieving, catalyst activation, rinsing, drying and screening of raw materials through physical and chemical...
There are two main types of equipment for adsorbing gold by activated carbon: one is a gold-containing heap immersion liquid through a fixed activated carbon layer from top to bottom, that is, a fixed bed adsorption system. The other type is that...
About Us
Related Products List
Contact Us
Send Inquiry
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.