Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
The activation method of the SLEP furnace is a method of activating the steam and flue gas alternately. The SLEP furnace is mainly composed of the furnace body, the regenerator, the water seal, the feeder and the chimney. It is suitable for the production of various kinds of granular carbon, the process conditions are stable, the quality of the product is uniform, the adsorption performance is good, the production of various advanced activated charcoal, big production capacity , the mechanical automation can be realized, the fuel is not needed, long furnace life and so on. So it is widely used in the production of international granular activated carbon. If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
The rotary activated carbon steam activation furnace is suitable for the two high temperature steam activation of activated carbon. Activated carbon is widely used, and its raw materials are diverse, coal and wood. Coke is obtained by pyrolysis and carbonization of raw materials at high temperature, but the coke has smaller pores, more plugging and less adsorption capacity. It is necessary to open and increase pores through secondary activation to increase specific surface area and adsorption...
Rotary Carbonization Furnace Advantages : --Combustible waste can bu reduced in size by more than 95% --By-product of garbage carbonization process "artificial carbon" fixed carbon content in high (about 90%) --Partial carbonization of rubbish can be activated very scalable(can activate up to 75%) --EU standard emission --Energy recycling and reusing design to save fuel. The working principle of continuous coconut shell carbonization furnace,which is adopting advanced smoke-free and...
The activation method of the SLEP Furnace is a method of activating the steam and flue gas alternately. The SLEP furnace is mainly composed of the furnace body, the regenerator, the water seal, the feeder and the chimney. It is suitable for the production of various kinds of granular carbon, the process conditions are stable, the quality of the product is uniform, the adsorption performance is good, the production of various advanced activated charcoal, big production capacity , the mechanical...
One-step Activation Furnace material is put into operation once, which saves time and effort and saves less investment. It is a kind of activation method of alternating activation of water vapor and flue gas. It can realize mechanical automation, without fuel and long service life, so it is widely used in the production of international granular activated carbon. Apperance Size:6m*8m*9m Weight:100t Output:2-5t(/day) Power:7KW In addition, our company also sells Rotary Carbonization Furnace,...
Activated Carbon Regeneration Furnace (external Heating) The characteristics of activated carbon regeneration furnace are: 1, the material quality is even. The moving state of the material in the furnace is dynamic movement and turnover, and the heating is uniform, which ensures the full reaction of the material. 2, high heating efficiency. Because of the movement of the material, the heating area of the material is enlarged, the heat conduction and radiation are enhanced, and the firing cycle...
Activated carbon production equipment one-step activation furnace storage bin installation site Complete Set Of Equipment Activated Carbon Furnace,Carbonization Activation Stove,Activated Carbon Production Equipment,Complete Set Of Activated Equipment If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inquiry,Please send mail directly to us.
Activated carbon Crushing Equipment FMFQ (S) double mill used for crushing activated carbon materials as well as corn,broomcorn,brewage,feedstuff milling in large and medium-sized flour factories. Activated Carbon Crushing Equipments Structure features: It has adopted new design and compact structure affording good performances and high efficiency. The machine is made of manganese plate with cast iron base to work smoothly.Synchronou eltdrive and eccentric wheel make an efficient structure to...
Activated carbon Dedusting Equipment TBLM series pulse bag filter is a kind of equipment widely used in drying process. The equipment makes use of the filter cloth made of dense fibers to suck and filter the dust in the hot air, such as doped dust, coal ash and bio-energy ash produced by the hot stove. After dust removal, the clean hot air will enter the drying section along the pipeline. The dust and dust that remain on the filter cloth gradually become bigger and bigger, and eventually settle...
Activated Carbon Crushing Equipments :Activated Carbon Single Roller Crusher is mainly used for the crushing of activated carbon,one of the main equipments of the activated carbon particle size. Activated carbon Crushing Equipment In addition, our company also sells Activated carbon Screening Equipment,Activated carbon Dedusting Equipment , Activated carbon Packaging Equipment matched with activated carbon production. Mobile Phone: +8613153736907 +8613153738637 Wechat:+8615864124409...
Knife crusher is a special sample preparation and crushing equipment for coal and biomass fuel laboratory. Its main characteristics are: a device can meet the requirements of straw fiber material and coal, ore and other granular material samples at the same time, and the crushing ratio is large. The rotor blade is designed symmetrically, and special wear-resistant material is used after special treatment. It has high strength, high hardness and long service life. Activated carbon Crushing...
Activated carbon Conveying Equipment All steel plates of good quality;Well sealed,no flying dust;Cold reduced blades,wear resistance;All high strength bolts in the joints; LSS Spiral Conveyor is mainly used to convey granula and powder materials,simple structured,easily operated,steady and reliable,which can charge and discharge at any place of the line;It is suitable for grain,feed,oil industries to horizontally convey granula and powder materials. In addition, our company also sells Rotary...
Activated carbon Dedusting Equipment XLD Type Cyclone Separator has many advantages such as using less metal material,has big air volume,simple structure,small resistance,high efficiency,small area occupied,less investment,easy maintain,fast effect,low energy consumption,no wearing parts etc... It has good effect on collecting dust with high density or big particle size.XLD Type Cyclone Separator will not be affected by different material concentration at entrance.According to different...
Activated carbon Drying Equipment Working principle When the wet material is put into the dryer from one end, the material is evenly distributed and dispersed in the dryer under the turning of the plate-making device with uniform distribution in the inner cylinder. The material is fully contacted with the hot air of parallel flow (counter-current), which speeds up the drying heat transfer and transfers to the driving force. During the drying process, the material can be adjusted and moved to...
Flour Machine Dedusting Equipment: Centrifugal fan is mainly used for conveying by airflow,ventilation and de-dusting in activated carbon plant,which has the charactristics of beautiful appearance,smooth operation etc.Flour Dedusting machine has three kinds of driving mode:A,C,D. High performance fan Field of work: high flow rates, low pressure heads. Type of impellers: sirocco (with squirrel-cage). Applications: extraction also of dusty air, vapours, where large volumes of air with low...
Activated carbon Crushing Equipment Model : AC3t-10t Size:20m*8m*5m Output:3t-10t Power:15KW Weight:4t The whole structure of Raymond mill is composed of main machine, analyzer, pipeline device and blower, which can be equipped with crusher, hoist, electromagnetic vibration feeder and electric motor according to the needs of users. After the material is crushed to the required granularity, the material is sent to the hopper by the elevator, and then the material is evenly and continuously sent...
screening packaging, winnowing system, screening and packaging, winnowing equipment Activated carbon Screening Equipment Model: AC-30t (d) size: 12m*8m*5m output: 30t power: 22KW The machine adopts hoist feeding, automatic water addition, negative pressure air separation, matching screening dust removal and automatic packaging system, saving time and labor, high output, accurate weighing and other advantages. Charcoal Screening Machine In addition, our company also sells Rotary Carbonization...
Large capacity coconut shell charcoal carbonized furnace for activated carbon coconut shell charcoal carbonzied furnace is mainly used for relative puffy coking of biomass material, the device is still using the char gasification type principle, USES the advanced smoke-free environment carbonization process: the whole equipment by the gasification system (gasifier, spray tower, filter), purification system (spray tower, oil-water separator, filter), carbonized system (carbonized host, screw...
SLEP Furnace is suitable for the production of various kinds of granular carbon, the process conditions are stable, the quality of the product is uniform, the adsorption performance is good, the production of various advanced activated charcoal, big production capacity , the mechanical automation can be realized, the fuel is not needed, long furnace life and so on. So it is widely used in the production of international granular activated carbon. The activation method of the SLEP furnace is a...
Advantages:Rotary Activated Furnace is suitable for all kinds of raw materials, good continuity, at the same time ,Rotary activation furnace can be adjusted according to different varieties of activated carbon air temperature, feed rate and residence time, reasonable heat utilization , carbon contact with activator is evener, shorter cremation time , so Rotary activation furnace is widely used in the world, especially in wood activated carbon production. Rotary activation furnace is an...
Metso`s carbon regeneration systems utilize thermal regeneration technology. Some industries call the product [AC" for activated carbon. The process uses an indirect fired kiln to heat the activated carbon to 700°C, driving off the organic and inorganic contaminants. The system uses a recycle duct to improve energy efficiency. Activated carbon regeneration furnace is an external indirect heating mode, which is composed of roller, transmission and support mechanism, heating furnace and smoke...
Activated carbon is a very good adsorbent. It uses charcoal, bamboo charcoal, various shells and high-quality coal as raw materials to crush, sieving, catalyst activation, rinsing, drying and screening of raw materials through physical and chemical...
There are two main types of equipment for adsorbing gold by activated carbon: one is a gold-containing heap immersion liquid through a fixed activated carbon layer from top to bottom, that is, a fixed bed adsorption system. The other type is that...
About Us
Related Products List
Contact Us
Send Inquiry
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.